Warranty Terms & Conditions

The conditions set out in this Warranty along with the Limited Warranty Conditions (Attachment 1), which attachment is incorporated herein by reference, govern the Warranty given by the Company to the Clients for the Beneficiary in respect of the Coatings System on the Yacht (defined below).

Limited Warranty Conditions: Definitions

Applicator means the professional individual or company as named in the ‘Table of Information’
Beneficiary means the applicator for the first twelve (12) Months
Clients means the Yard, Owner and Applicator.
Coatings means all paints and fillers manufactured by the Guarantor which are set out in the Coatings Specification.
Coatings Specification means the approved systems as published in AkzoNobel published technical literature or provided via a technical specification from the guarantor.
Coatings System means all the combined Paint Systems for the Yacht as set out in the Coatings Specification
Commencement Date means the date the Yacht leaves the controlled environment of the construction hall or application enclosure and first becomes exposed to the natural atmospheric elements. This date shall be no later than four (4) months after the date of completion of the application of the Coatings System.
Company International Paint Limited. Registered Company No.: 63604 Registered Office: The AkzoNobel Building Wexham Road, Slough, United Kingdom, SL2 5DS (Manufacturer of the brands Awlgrip® and International®).
Defective Areas as defined in clause 2 of the Conditions of Guarantee (Attachment 1).
Owner means the owner or owner’s representative of the coated yacht as outlined in the ‘Table of Information’
Paint System means the specific Coatings specified for a Guaranteed Area of the Yacht.
Parties means the Guarantor and the Clients.
Pre-Project Meeting means a meeting of all Parties to define: 1. Project Timeline; 2. Coatings Specification; 3. Communication Protocols; 4. Acceptance Criteria; 5. Inspection & Exception Reporting; and 6. Coatings Manufacturer Support.
Total Limit of Liability as defined in Clause 6(b) of the Conditions of Guarantee (Attachment 1).
Warranty means this Contract of Guarantee together with Conditions of Guarantee (Attachment 1) as set out above and attached to this document.
Warranty Period 12 Months Twelve (12) months from the Commencement Date for a new fully applied Coatings System or Twelve (12) months from the Commencement Date for the maintenance, repaints, refits or repairs of an existing Coatings System.
Warranty Period 18 Months Eighteen (18) months from the Commencement Date for a new fully applied Coatings System or Eighteen (18) months from the Commencement Date for the maintenance, repaints, refits or repairs of an existing Coatings System.
Warranty Period 24 Months Twenty-four (24) months from the Commencement Date for a new fully applied Coatings System or Twenty-four (24) months from the Commencement Date for the maintenance, repaints, refits or repairs of an existing Coatings System.
Warranty Period 36 Months Thirty-Six (36) months from the Commencement Date for a new fully applied Coatings System or Thirty-Six (36) months from the Commencement Date for the maintenance, repaints, refits or repairs of an existing Coatings System.
Warranty Area means the following: 1. the exterior of the hull above the waterline; and/or 2. the exterior of the superstructure of the Yacht; and/or 3. the interior area.
Yacht means the name of the vessel which has been coated as outlined in the ‘Table of Information’
Yard means the location where the professional application has been undertaken as outlined in the ‘Table of Information’


Awlgrip Limited Warranty 12 Months Conditions (North America)

All capitalized terms not defined in these Limited Warranty Conditions shall have the meaning provided in the Limited Warranty of which this document is an Attachment.

1 Extent of Warranty

1.1 The Company hereby agrees, subject to these Limited Warranty Conditions set out herein, to guarantee to the Beneficiary the performance of the Coatings System on the Warranted Area when professionally applied to the Yacht as per the Company provided Coatings Specification.

1.2 The obligations of the Company under this Warranty shall be in effect from the Commencement Date through the expiration of the Warranty Period for the Yacht.

1.3 The Commencement date means the date the Yacht leaves the

controlled environment of the construction hall or application

enclosure and first becomes exposed to the natural atmospheric

elements. This date shall be no later than four (4) months after

the date of completion of the application of the Coatings System.

1.4 Any repairs carried out under this Warranty do not extend the duration of this Warranty.

1.5 The Clients agree that the Beneficiary has the sole right to claim under this Warranty and they agree to cooperate fully with the Beneficiary and Company to fulfil all their obligations as specified in this Warranty.

2 Defective Areas

2.1 The Company shall be liable only for “Defective Areas” which throughout this Warranty shall mean an aggregated surface area exceeding five percent (5%) of the total surface of the Warranted Area (excluding those areas and defects referred to in Clause 4) where non-destructive testing shows that:

(a) The gloss level of the Paint System applied in accordance with the relevant Technical Data Sheet on the hull exterior above the waterline, or the superstructure exterior, is less than sixty percent (60%) in the first twelve (12) months, of the original gloss level, measured at an angle of sixty (60) degrees in accordance with the measurement of specular gloss of non-metallic paint films as defined in ISO 2813:2014; or

(b) The colour level of the Paint System on the hull exterior above the waterline or the superstructure exterior has changed by more than Delta E7.5 (De7.5) for all colours up to twelve (12) months when measured in accordance with ISO 18314-1:2015

2.2 In the case of maintenance, repaints, refits or repairs of an existing Yacht, Clauses 2.1(a), 2.1(b) and 2.1(c) shall not apply and are not covered by this Warranty.

3 General Conditions

The Company shall not be liable for a claim unless:

(a) The following procedures have been adhered to and completed in full:

(i) For a new build Yacht less than thirty (30) meters in overall length and all Yacht maintenance, repaints, refits and repairs:

(A) Limited Warranty online registration completed;

(B) Coatings System applied to the Yacht as per standard Company published Coatings Specification; and

(C) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied.

(ii) For a new build Yacht thirty (30) to fifty (50) meters in overall length:

(A) Limited Warranty signed on the behalf of the Company, Owner, Yard and Applicator prior to application of Coatings;

(B) Coatings System applied as per Company provided Coatings Specification issued for the Yacht; and

(C) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied.

(iii) For a new build Yacht over fifty (50) meters in overall length:

(A) Completion of a Pre-Project Meeting with the Company, Owner, Yard and Applicator;

(B) Limited Warranty signed on the behalf of the Company, Owner, Yard and Applicator prior to application of Coatings;

(C) Coatings System applied as per Company provided Coatings Specification issued for the Yacht; and

(D) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied;

(b) Any surfaces and coatings damaged during work on the Yacht have been repaired to the Company’s Coatings Specification;

(c) All normal maintenance procedures (including without limitation all cleaning and washing procedures) are in line with the Company’s recommendations and have been duly carried out; and

(d) The defects are due to an inherent defect in the Coatings that results in Defective Areas as defined in Clause 2.1 above.

4 Exclusions

The Company shall not be liable for:

(a) Damage to the Coatings System arising from external causes outside the control of the Company including (but not limited to) welding or other heating, pollution, mechanical damage, electrical or electrolytic damage, incorrect cleaning or incorrect use, neglect, fire, explosion, radiation or other accident, acts of God, wars (whether declared or not), riot, civil commotion, vandalism or other malicious damage, industrial action, adverse weather conditions (such as, for example, sandstorms) and the like;

(b) Coatings on surface areas which because of their physical shape, characteristics or configuration present special difficulties in effecting specified preparation and coating, including (but not limited to) ladders, handrails and all small area equipment and attachments, and the like;

(c) Deterioration of the substrate caused by electro-chemical action arising from the presence of metals which are cathodic to the metal of those areas of the Yacht covered by this Warranty;

(d) In the case of maintenance, repaints, refits or repairs of an existing Yacht, any faults and/or defects caused by or related to already present coatings and coatings which have not been removed to the bare substrate;

(e) Deterioration of any part of the Coatings System caused by work carried out on the Yacht including (but not limited to) polishing or any other form of surface treatment without prior written consent;

(f) Any delay or failure by the Company to carry out its obligations under this Warranty arising out of circumstances beyond its control including (but not limited to) riot, civil commotion, industrial action and the like;

(g) Cracks or delamination in the Coatings System caused by substrate flexing or movement. The Yard is responsible for ensuring that the construction and design is appropriate for the chosen Coatings System, specifically for fairing with the chosen epoxy filler system, without causing it to crack or to delaminate;

(h) Antifouling & Foul release coatings. As the performance of antifouling is influenced by factors beyond the Company’s control, antifouling performance is specifically excluded from this Warranty. Foul release coatings are handled as a separate process and are specifically excluded from this Warranty;

(i) Performance on Wood. As wood is a natural material and the performance of coatings or varnishes will depend for a large part on the quality of the wood and its construction, these parts are specifically excluded from this Warranty; or

(j) Tanks, Flooring & Insulation. Due to the more complex nature of application and maintenance, these parts are specifically excluded from this Warranty.

(k) Topcoat finishes with an initial gloss of less than eighty seven (87) when measured at an angle of sixty (60) degrees in accordance with the measurement of specular gloss of non-metallic paint films as defined in ISO 2813:2014

(l) Corrosion resulting from the failure of the existing underlying coatings system

(m) Blistering, cracking and / or peeling of the paint system that are a direct result of the existing underlying coating system

(n) Spontaneous detachment of the coatings comprised in the Coatings System from each other, or from the existing system

5 Claims

In the event of a failure of the Coatings System as defined in Clause 2.1:

(a) The Beneficiary shall notify the Company of any claim by certified or registered mail (in each case, return receipt requested, postage prepaid) to the address of the Company set forth in the Limited Warranty giving full details of the nature of the defect, the size and area, and the circumstances in which it was discovered including the date of detection, the location of the Yacht and whether it is out of water or not. Unless this written notice is received by the Company within thirty (30) days of the date of detection of the defect all claims to which such notice relates shall automatically be excluded and time barred thereafter;

(b) If the Company wishes to inspect the area of the Yacht in respect of which a claim is made, the Yacht shall be made available for such inspection as soon as reasonably practicable and in any event within sixty (60) days of receiving such request at the location at which the Yacht was originally coated or such other location as may be mutually agreed between the Company and the Beneficiary. The Yacht will be made available for the Company’s inspection within such period and prior to any repair work being carried out, failing which the Company shall have no liability to the Beneficiary whether under this Warranty or otherwise;

(c) The Beneficiary shall, in the event of a claim, make available to the Company records showing the environment to which all areas of the Yacht covered by this Warranty have been exposed since initial application of the Coatings System such as, but not limited to: surface treating, washing/cleaning procedures used and any other data needed to re-construct the chronological service history of the Yacht;

(d) As Beneficiary’s sole exclusive remedy for breach of warranty and/or any other alleged claim relating to the Coatings System, the Company will, subject to these Limited Warranty Conditions, supply the Coatings to effect the repair of the Defective Areas and shall cover the reasonable costs of application of such Coatings as follows:

(i) for any claims received during the first twelve (12) months from the Commencement Date: seventy-five percent (75%) of such costs

(e) The Company shall, subject to these Limited Warranty Conditions, reimburse the Beneficiary for the reasonable costs of scaffolding and tenting to the extent that they are directly attributable to the repair of the Defective Areas against written evidence of such costs actually incurred.

(f) It shall be the Beneficiary’s burden when making any claim under this Warranty to show that Defective Areas:

(i) were not caused by failure to comply with the conditions set out in Clause 3; and

(ii) do not fall within any of the exclusions set out in Clause 4;

(g) No acceptance of any claim by the Company shall be effective unless it is explicitly communicated to the Beneficiary in writing by the Company; and

(h) Repairs under this Warranty may only be carried out after consultation with the Company who reserves the right to approve or negotiate the contracts for such repairs which shall be carried out as soon as practicable, but the Company does not assume liability for delay in carrying out or completion thereof. For the avoidance of doubt, the Beneficiary agrees that the Company shall not have any responsibility and/or liability for the negotiation and/or management of any contract for such repairs and shall not be a party to any such contract.

6 Disclaimer; Limitation of Liability

(a) EXCEPT AS SET FORTH IN THIS WARRANTY, COMPANY MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, OF ANY KIND WITH RESPECT TO THE COATINGS SYSTEM AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MECHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

(b) THE COMPANY’S ENTIRE AGGREGATE LIABILITY FOR ANY CLAIM OR CLAIMS UNDER CLAUSES 5(D) AND 5(E) OF THIS WARRANTY FOR A NEW BUILD YACHT SHALL NOT EXCEED FOUR (4) TIMES THE PURCHASE PRICE OF THE COATINGS IN THE DEFECTIVE AREAS, AND FOR MAINTENANCE, REPAINTS, REFITS OR REPAIRS SHALL NOT EXCEED FIVE (5) TIMES THE PURCHASE PRICE OF THE COATINGS DEEMED FAULTY.

(c) IN NO CIRCUMSTANCES WHATSOEVER SHALL THE COMPANY BE LIABLE FOR ANY DIRECT LOSSES OTHER THAN THOSE AMOUNTS DESCRIBED IN CLAUSES 5(D) AND 5(E) ABOVE, OR INDIRECT LOSSES INCLUDING (WITHOUT LIMITATION) DEMURRAGE, SLIPPING COSTS, HARBOR COSTS, HARBOR DUES, BOATYARD SERVICES AND THE LIKE ASSOCIATED WITH COATINGS REPAIR WORK, LOSS OF TIME, MONIES DUE TO THE BENEFICIARY’S EMPLOYEES OR TO OPERATORS OR CHARTERERS, LOSS OF PROFITS, LOST CONTRACTS, LOST OPPORTUNITY TO CONTRACT AND ANY SUCH SIMILAR COSTS AND ALL CLAIMS BY THIRD PARTIES AGAINST THE BENEFICIARY.

(d) The Beneficiary acknowledges that any associated or affiliated company of the Company (“Affiliate”) has no liability whatsoever with respect to the Yacht, and the Beneficiary releases such Affiliates from any and all such liability. The liability of the Company under this Warranty is (subject to Clause 6(e)) in substitution for all other liability of the Company and/or its Affiliates in connection with or relating to coatings, products and/or advice and assistance supplied in respect of the Yacht whether in contract, tort or otherwise.

(e) This Warranty does not exclude or restrict liability for death or personal injury caused by the sole negligence of the Company and/or its Affiliates.

7 Indemnity

The Beneficiary agrees that it will at all times from the Commencement Date hold harmless and indemnify the Company against all third party claims for loss, damage or expenses including legal expenses brought against the Company of whatsoever nature and howsoever arising caused by or related to the Coatings System, its application or repair under this Warranty. This indemnity shall apply to all third party claims except claims relating to death or personal injury arising out of the Company’s sole negligence in the performance of its obligations under this Warranty.

8 General

8.1 This Warranty and the Attachments attached hereto and forming a part hereof, sets out the complete, and final agreement and understanding between the Company and the Clients relating to the subject matter of this Warranty and supersede all prior oral or written agreements, understandings, representations, statements, and assurances. There are no warranties, representations, covenants, promises, agreements, conditions or understandings, either oral or written, between the Company and the Clients other than as set forth in this Warranty and the Attachments. The Company represents and acknowledges that Beneficiary is not relying upon any oral or written statement, warranty or representation by the Company, its employees, agents, and/or representatives not fully set forth in this Warranty.

8.2 No alteration, amendment, change or addition to this Warranty (including to any of the Attachments) shall be binding upon the Company or the Clients unless made in writing and signed by authorized representatives for each of the Company and the Clients.

8.3 The Parties shall agree to use the dispute resolution mechanism set out below in the event that any claim or dispute arises under or in connection with this Warranty:

(a) The Parties will attempt to settle such claim or dispute by good faith negotiations; and

(b) If any claim or dispute cannot be settled by negotiation within thirty (30) days after a written offer has been given to the other Parties to negotiate a settlement to such claim or dispute, the Parties shall, before resorting to court proceedings, attempt in good faith to resolve the claim or dispute by mediation administered by the American Arbitration Association (AAA) under its Commercial Mediation Procedures.

8.4 This Warranty shall be governed by and construed in accordance with the laws of the State of Texas, United States of America. All litigation concerning this Warranty, if necessary, shall occur only in the state and federal courts within the territory encompassed by the U.S. District Court for the Southern District of Texas, and the Parties agree to exclusive jurisdiction in such courts.

8.5 This Warranty may not be assigned by the Clients without the Company’s prior written consent.


Awlgrip HDT Limited Warranty 18 Months Conditions (North America)

All capitalized terms not defined in these Limited Warranty Conditions shall have the meaning provided in the Limited Warranty of which this document is an Attachment.

1 Extent of Warranty

1.1 The Company hereby agrees, subject to these Limited Warranty Conditions set out herein, to guarantee to the Beneficiary the performance of the Coatings System on the Warranted Area when professionally applied (as evidence by invoice) to the Yacht as per the Company provided Coatings Specification.

1.2 The obligations of the Company under this Warranty shall be in effect from the Commencement Date through the expiration of the Warranty Period for the Yacht.

1.3 The Commencement date means the date the Yacht leaves the controlled environment of the construction hall or application enclosure and first becomes exposed to the natural atmospheric elements. This date shall be no later than four (4) months after the date of completion of the application of the Coatings System.

1.4 Any repairs carried out under this Warranty do not extend the duration of this Warranty.

1.5 The Clients agree that the Beneficiary has the sole right to claim under this Warranty and they agree to cooperate fully with the Beneficiary and Company to fulfil all their obligations as specified in this Warranty.

2 Defective Areas

2.1 The Company shall be liable only for “Defective Areas” which throughout this Warranty shall mean an aggregated surface area exceeding two percent (2%) of the total surface of the Warranted Area (excluding those areas and defects referred to in Clause 4) where non-destructive testing shows that:

(a) On visual inspection spontaneous detachment of the coatings comprised in the Coatings System from each other, or from the substrate, has occurred; or

(b) In the case of a steel substrate, on visual inspection that the steel has corroded to a severity greater than Ri.2 as defined in ISO 4628-3:2003; or

(c) The Paint System has on visual inspection blistered, cracked and/or peeled above the size 2 quantity (density) 2, as defined in ISO 4628/2-4-5; or

(d) The gloss level of the Paint System applied in accordance with the relevant Technical Data Sheet on the hull exterior above the waterline, or the superstructure exterior, is less than eighty percent (80%) in the first twelve (12) months, or sixty percent (60%) in months twelve (12) to eighteen (18), of the original gloss level, measured at an angle of sixty (60) degrees in accordance with the measurement of specular gloss of non-metallic paint films as defined in ISO 2813:2014; or

(e) The color level of the Paint System on the hull exterior above the waterline or the superstructure exterior has changed by more than:

(i) Delta E5 (De 5) for all colors up to twelve (12) months; or

(ii) Delta E7.5 (De 7.5) for all colors up to eighteen (18) months;

when measured in accordance with ISO 18314-1:2015

2.2 CLAUSES 2.1(A), 2.1(B) AND 2.1(C) SHALL ONLY APPLY TO NEW BUILD YACHTS AND THEREFORE SHALL NOT APPLY TO MAINTENANCE, REPAINTS, REPAIRS OR REFITS OF AN EXISTING YACHT. SUCH APPLICATIONS SHALL ONLY BE COVERED BY CLAUSES 2.1 (D) AND (E)

3 General Conditions

The Company shall not be liable for a claim unless:

(a) The following procedures have been adhered to and completed in full:

(i) For a new build Yacht less than thirty (30) meters in overall length and all Yacht maintenance, repaints, refits and repairs:

(A) Limited Warranty online registration completed;

(B) Coatings System applied to the Yacht as per standard Company published Coatings Specification; and

(C) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied.

(ii) For a new build Yacht thirty (30) to fifty (50) meters in overall length:

(A) Limited Warranty signed on the behalf of the Company, Owner, Yard and Applicator prior to application of Coatings;

(B) Coatings System applied as per Company provided Coatings Specification issued for the Yacht; and

(C) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied.

(iii) For a new build Yacht over fifty (50) meters in overall length:

(A) Completion of a Pre-Project Meeting with the Company, Owner, Yard and Applicator;

(B) Limited Warranty signed on the behalf of the Company, Owner, Yard and Applicator prior to application of Coatings;

(C) Coatings System applied as per Company provided Coatings Specification issued for the Yacht; and

(D) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied;

(b) Any surfaces and coatings damaged during work on the Yacht have been repaired to the Company’s Coatings Specification;

(c) All normal maintenance procedures (including without limitation all cleaning and washing procedures) are in line with the Company’s recommendations and have been duly carried out; and

(d) The defects are due to an inherent defect in the Coatings that results in Defective Areas as defined in Clause 2.1 above.

4 Exclusions

The Company shall not be liable for:

(a) Damage to the Coatings System arising from external causes outside the control of the Company including (but not limited to) welding or other heating, pollution, mechanical damage, electrical or electrolytic damage, incorrect cleaning or incorrect use, neglect, fire, explosion, radiation or other accident, acts of God, wars (whether declared or not), riot, civil commotion, vandalism or other malicious damage, industrial action, adverse weather conditions (such as, for example, sandstorms) and the like;

(b) Coatings on surface areas which because of their physical shape, characteristics or configuration present special difficulties in effecting specified preparation and coating, including (but not limited to) ladders, handrails and all small area equipment and attachments, and the like;

(c) Deterioration of the substrate caused by electro-chemical action arising from the presence of metals which are cathodic to the metal of those areas of the Yacht covered by this Warranty;

(d) In the case of maintenance, repaints, refits or repairs of an existing Yacht, any faults and/or defects caused by or related to already present coatings and coatings which have not been removed to the bare substrate;

(e) Deterioration of any part of the Coatings System caused by work carried out on the Yacht including (but not limited to) polishing or any other form of surface treatment without prior written consent;

(f) Any delay or failure by the Company to carry out its obligations under this Warranty arising out of circumstances beyond its control including (but not limited to) riot, civil commotion, industrial action and the like;

(g) Cracks or delamination in the Coatings System caused by substrate flexing or movement. The Yard is responsible for ensuring that the construction and design is appropriate for the chosen Coatings System, specifically for fairing with the chosen epoxy filler system, without causing it to crack or to delaminate;

(h) Antifouling & Foul release coatings. As the performance of antifouling is influenced by factors beyond the Company’s control, antifouling performance is specifically excluded from this Warranty. Foul release coatings are handled as a separate process and are specifically excluded from this Warranty;

(i) Performance on Wood. As wood is a natural material and the performance of coatings or varnishes will depend for a large part on the quality of the wood and its construction, these parts are specifically excluded from this Warranty; or

(j) Tanks, Flooring & Insulation. Due to the more complex nature of application and maintenance, these parts are specifically excluded from this Warranty.

(k) Topcoat finishes with an initial gloss of less than eighty seven (87) when measured at an angle of sixty (60) degrees in accordance with the measurement of specular gloss of non-metallic paint films as defined in ISO 2813:2014

5 Claims

In the event of a failure of the Coatings System as defined in Clause 2.1:

(a) The Beneficiary shall notify the Company of any claim by certified or registered mail (in each case, return receipt requested, postage prepaid) to the address of the Company set forth in the Limited Warranty giving full details of the nature of the defect, the size and area, and the circumstances in which it was discovered including the date of detection, the location of the Yacht and whether it is out of water or not. Unless this written notice is received by the Company within thirty (30) days of the date of detection of the defect all claims to which such notice relates shall automatically be excluded and time barred thereafter;

(b) If the Company wishes to inspect the area of the Yacht in respect of which a claim is made, the Yacht shall be made available for such inspection as soon as reasonably practicable and in any event within sixty (60) days of receiving such request at the location at which the Yacht was originally coated or such other location as may be mutually agreed between the Company and the Beneficiary. The Yacht will be made available for the Company’s inspection within such period and prior to any repair work being carried out, failing which the Company shall have no liability to the Beneficiary whether under this Warranty or otherwise;

(c) The Beneficiary shall, in the event of a claim, make available to the Company records showing the environment to which all areas of the Yacht covered by this Warranty have been exposed since initial application of the Coatings System such as, but not limited to: surface treating, washing/cleaning procedures used and any other data needed to re-construct the chronological service history of the Yacht;

(d) As Beneficiary’s sole exclusive remedy for breach of warranty and/or any other alleged claim relating to the Coatings System, the Company will, subject to these Limited Warranty Conditions, supply the Coatings to effect the repair of the Defective Areas and shall cover the reasonable costs of application of such Coatings as follows:

(i) for any claims received during the first twelve (12) months from the Commencement Date: one hundred percent (100%) of such costs; and

(ii) for any claims received after the first twelve (12) months from the Commencement Date until the expiration of the Warranty Period: seventy-five percent (75%) of such costs;

(e) The Company shall, subject to these Limited Warranty Conditions, reimburse the Beneficiary for the reasonable costs of scaffolding and tenting to the extent that they are directly attributable to the repair of the Defective Areas against written evidence of such costs actually incurred.

(f) It shall be the Beneficiary’s burden when making any claim under this Warranty to show that Defective Areas:

(i) were not caused by failure to comply with the conditions set out in Clause 3; and

(ii) do not fall within any of the exclusions set out in Clause 4;

(g) No acceptance of any claim by the Company shall be effective unless it is explicitly communicated to the Beneficiary in writing by the Company; and

(h) Repairs under this Warranty may only be carried out after consultation with the Company who reserves the right to approve or negotiate the contracts for such repairs which shall be carried out as soon as practicable, but the Company does not assume liability for delay in carrying out or completion thereof. For the avoidance of doubt, the Beneficiary agrees that the Company shall not have any responsibility and/or liability for the negotiation and/or management of any contract for such repairs and shall not be a party to any such contract.

6 Disclaimer; Limitation of Liability

(a) EXCEPT AS SET FORTH IN THIS WARRANTY, COMPANY MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, OF ANY KIND WITH RESPECT TO THE COATINGS SYSTEM AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MECHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

(b) THE COMPANY’S ENTIRE AGGREGATE LIABILITY FOR ANY CLAIM OR CLAIMS UNDER CLAUSES 5(D) AND 5(E) OF THIS WARRANTY FOR A NEW BUILD YACHT SHALL NOT EXCEED FOUR (4) TIMES THE PURCHASE PRICE OF THE COATINGS IN THE DEFECTIVE AREAS, AND FOR MAINTENANCE, REPAINTS, REFITS OR REPAIRS SHALL NOT EXCEED FIVE (5) TIMES THE PURCHASE PRICE OF THE COATINGS DEEMED FAULTY.

(c) IN NO CIRCUMSTANCES WHATSOEVER SHALL THE COMPANY BE LIABLE FOR ANY DIRECT LOSSES OTHER THAN THOSE AMOUNTS DESCRIBED IN CLAUSES 5(D) AND 5(E) ABOVE, OR INDIRECT LOSSES INCLUDING (WITHOUT LIMITATION) DEMURRAGE, SLIPPING COSTS, HARBOR COSTS, HARBOR DUES, BOATYARD SERVICES AND THE LIKE ASSOCIATED WITH COATINGS REPAIR WORK, LOSS OF TIME, MONIES DUE TO THE BENEFICIARY’S EMPLOYEES OR TO OPERATORS OR CHARTERERS, LOSS OF PROFITS, LOST CONTRACTS, LOST OPPORTUNITY TO CONTRACT AND ANY SUCH SIMILAR COSTS AND ALL CLAIMS BY THIRD PARTIES AGAINST THE BENEFICIARY.

(d) The Beneficiary acknowledges that any associated or affiliated company of the Company (“Affiliate”) has no liability whatsoever with respect to the Yacht, and the Beneficiary releases such Affiliates from any and all such liability. The liability of the Company under this Warranty is (subject to Clause 6(e)) in substitution for all other liability of the Company and/or its Affiliates in connection with or relating to coatings, products and/or advice and assistance supplied in respect of the Yacht whether in contract, tort or otherwise.

(e) This Warranty does not exclude or restrict liability for death or personal injury caused by the sole negligence of the Company and/or its Affiliates.

7 Indemnity

The Beneficiary agrees that it will at all times from the Commencement Date hold harmless and indemnify the Company against all third party claims for loss, damage or expenses including legal expenses brought against the Company of whatsoever nature and howsoever arising caused by or related to the Coatings System, its application or repair under this Warranty. This indemnity shall apply to all third party claims except claims relating to death or personal injury arising out of the Company’s sole negligence in the performance of its obligations under this Warranty.

8 General

8.1 This Warranty and the Attachments attached hereto and forming a part hereof, sets out the complete, and final agreement and understanding between the Company and the Clients relating to the subject matter of this Warranty and supersede all prior oral or written agreements, understandings, representations, statements, and assurances. There are no warranties, representations, covenants, promises, agreements, conditions or understandings, either oral or written, between the Company and the Clients other than as set forth in this Warranty and the Attachments. The Company represents and acknowledges that Beneficiary is not relying upon any oral or written statement, warranty or representation by the Company, its employees, agents, and/or representatives not fully set forth in this Warranty.

8.2 No alteration, amendment, change or addition to this Warranty (including to any of the Attachments) shall be binding upon the Company or the Clients unless made in writing and signed by authorized representatives for each of the Company and the Clients.

8.3 The Parties shall agree to use the dispute resolution mechanism set out below in the event that any claim or dispute arises under or in connection with this Warranty:

(a) The Parties will attempt to settle such claim or dispute by good faith negotiations; and

(b) If any claim or dispute cannot be settled by negotiation within thirty (30) days after a written offer has been given to the other Parties to negotiate a settlement to such claim or dispute, the Parties shall, before resorting to court proceedings, attempt in good faith to resolve the claim or dispute by mediation administered by the American Arbitration Association (AAA) under its Commercial Mediation Procedures.

8.4 This Warranty shall be governed by and construed in accordance with the laws of the State of Texas, United States of America. All litigation concerning this Warranty, if necessary, shall occur only in the state and federal courts within the territory encompassed by the U.S. District Court for the Southern District of Texas, and the Parties agree to exclusive jurisdiction in such courts.

8.5 This Warranty may not be assigned by the Clients without the Company’s prior written consent.


Awlgrip HDT Limited Warranty 24 Months Conditions (North America)

All capitalized terms not defined in these Limited Warranty Conditions shall have the meaning provided in the Limited Warranty of which this document is an Attachment.

1 Extent of Warranty

1.1 The Company hereby agrees, subject to these Limited Warranty Conditions set out herein, to guarantee to the Beneficiary the performance of the Coatings System on the Warranted Area when professionally applied to the Yacht (as evidence by invoice) as per the Company provided Coatings Specification.

1.2 The obligations of the Company under this Warranty shall be in effect from the Commencement Date through the expiration of the Warranty Period for the Yacht.

1.3 The Commencement date means the date the Yacht leaves the controlled environment of the construction hall or application enclosure and first becomes exposed to the natural atmospheric elements. This date shall be no later than four (4) months after the date of completion of the application of the Coatings System.

1.4 Any repairs carried out under this Warranty do not extend the duration of this Warranty.

1.5 The Clients agree that the Beneficiary has the sole right to claim under this Warranty and they agree to cooperate fully with the Beneficiary and Company to fulfil all their obligations as specified in this Warranty.

2 Defective Areas

2.1 The Company shall be liable only for “Defective Areas” which throughout this Warranty shall mean an aggregated surface area exceeding two percent (2%) of the total surface of the Warranted Area (excluding those areas and defects referred to in Clause 4) where non-destructive testing shows that:

(a) On visual inspection spontaneous detachment of the coatings comprised in the Coatings System from each other, or from the substrate, has occurred; or

(b) In the case of a steel substrate, on visual inspection that the steel has corroded to a severity greater than Ri.2 as defined in ISO 4628-3:2003; or

(c) The Paint System has on visual inspection blistered, cracked and/or peeled above the size 2 quantity (density) 2, as defined in ISO 4628/2-4-5; or

(d) The gloss level of the Paint System applied in accordance with the relevant Technical Data Sheet on the hull exterior above the waterline, or the superstructure exterior, is less than eighty percent (80%) in the first twenty-four (24) months of the original gloss level, measured at an angle of sixty (60) degrees in accordance with the measurement of specular gloss of non-metallic paint films as defined in ISO 2813:2014; or

(e) The colour level of the Paint System on the hull exterior above the waterline or the superstructure exterior has changed by more than Delta E5 (De 5) for all colours up to twenty-four (24) months when measured in accordance with ISO 18314-1:2015

2.2 CLAUSES 2.1(A), 2.1(B) AND 2.1(C) SHALL ONLY APPLY TO NEW BUILD YACHTS AND THEREFORE SHALL NOT APPLY TO MAINTENANCE, REPAINTS, REPAIRS OR REFITS OF AN EXISTING YACHT. SUCH APPLICATIONS SHALL ONLY BE COVERED BY CLAUSES 2.1 (D) AND (E)

3 General Conditions

The Company shall not be liable for a claim unless:

(a) The following procedures have been adhered to and completed in full:

(i) For a new build Yacht less than thirty (30) meters in overall length and all Yacht maintenance, repaints, refits and repairs:

(A) Limited Warranty online registration completed;

(B) Coatings System applied to the Yacht as per standard Company published Coatings Specification; and

(C) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied.

(ii) For a new build Yacht thirty (30) to fifty (50) meters in overall length:

(A) Limited Warranty signed on the behalf of the Company, Owner, Yard and Applicator prior to application of Coatings;

(B) Coatings System applied as per Company provided Coatings Specification issued for the Yacht; and

(C) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied.

(iii) For a new build Yacht over fifty (50) meters in overall length:

(A) Completion of a Pre-Project Meeting with the Company, Owner, Yard and Applicator;

(B) Limited Warranty signed on the behalf of the Company, Owner, Yard and Applicator prior to application of Coatings;

(C) Coatings System applied as per Company provided Coatings Specification issued for the Yacht; and

(D) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied;

(b) Any surfaces and coatings damaged during work on the Yacht have been repaired to the Company’s Coatings Specification;

(c) All normal maintenance procedures (including without limitation all cleaning and washing procedures) are in line with the Company’s recommendations and have been duly carried out; and

(d) The defects are due to an inherent defect in the Coatings that results in Defective Areas as defined in Clause 2.1 above.

4 Exclusions

The Company shall not be liable for:

(a) Damage to the Coatings System arising from external causes outside the control of the Company including (but not limited to) welding or other heating, pollution, mechanical damage, electrical or electrolytic damage, incorrect cleaning or incorrect use, neglect, fire, explosion, radiation or other accident, acts of God, wars (whether declared or not), riot, civil commotion, vandalism or other malicious damage, industrial action, adverse weather conditions (such as, for example, sandstorms) and the like;

(b) Coatings on surface areas which because of their physical shape, characteristics or configuration present special difficulties in effecting specified preparation and coating, including (but not limited to) ladders, handrails and all small area equipment and attachments, and the like;

(c) Deterioration of the substrate caused by electro-chemical action arising from the presence of metals which are cathodic to the metal of those areas of the Yacht covered by this Warranty;

(d) In the case of maintenance, repaints, refits or repairs of an existing Yacht, any faults and/or defects caused by or related to already present coatings and coatings which have not been removed to the bare substrate;

(e) Deterioration of any part of the Coatings System caused by work carried out on the Yacht including (but not limited to) polishing or any other form of surface treatment without prior written consent;

(f) Any delay or failure by the Company to carry out its obligations under this Warranty arising out of circumstances beyond its control including (but not limited to) riot, civil commotion, industrial action and the like;

(g) Cracks or delamination in the Coatings System caused by substrate flexing or movement. The Yard is responsible for ensuring that the construction and design is appropriate for the chosen Coatings System, specifically for fairing with the chosen epoxy filler system, without causing it to crack or to delaminate;

(h) Antifouling & Foul release coatings. As the performance of antifouling is influenced by factors beyond the Company’s control, antifouling performance is specifically excluded from this Warranty. Foul release coatings are handled as a separate process and are specifically excluded from this Warranty;

(i) Performance on Wood. As wood is a natural material and the performance of coatings or varnishes will depend for a large part on the quality of the wood and its construction, these parts are specifically excluded from this Warranty; or

(j) Tanks, Flooring & Insulation. Due to the more complex nature of application and maintenance, these parts are specifically excluded from this Warranty.

(k) Topcoat finishes with an initial gloss of less than eighty seven (87) when measured at an angle of sixty (60) degrees in accordance with the measurement of specular gloss of non-metallic paint films as defined in ISO 2813:2014

5 Claims

In the event of a failure of the Coatings System as defined in Clause 2.1:

(a) The Beneficiary shall notify the Company of any claim by certified or registered mail (in each case, return receipt requested, postage prepaid) to the address of the Company set forth in the Limited Warranty giving full details of the nature of the defect, the size and area, and the circumstances in which it was discovered including the date of detection, the location of the Yacht and whether it is out of water or not. Unless this written notice is received by the Company within thirty (30) days of the date of detection of the defect all claims to which such notice relates shall automatically be excluded and time barred thereafter;

(b) If the Company wishes to inspect the area of the Yacht in respect of which a claim is made, the Yacht shall be made available for such inspection as soon as reasonably practicable and in any event within sixty (60) days of receiving such request at the location at which the Yacht was originally coated or such other location as may be mutually agreed between the Company and the Beneficiary. The Yacht will be made available for the Company’s inspection within such period and prior to any repair work being carried out, failing which the Company shall have no liability to the Beneficiary whether under this Warranty or otherwise;

(c) The Beneficiary shall, in the event of a claim, make available to the Company records showing the environment to which all areas of the Yacht covered by this Warranty have been exposed since initial application of the Coatings System such as, but not limited to: surface treating, washing/cleaning procedures used and any other data needed to re-construct the chronological service history of the Yacht;

(d) As Beneficiary’s sole exclusive remedy for breach of warranty and/or any other alleged claim relating to the Coatings System, the Company will, subject to these Limited Warranty Conditions, supply the Coatings to effect the repair of the Defective Areas and shall cover the reasonable costs of application of such Coatings as follows:

(i) for any claims received during the first twelve (12) months from the Commencement Date: one hundred percent (100%) of such costs; and

(ii) for any claims received after the first twelve (12) months from the Commencement Date until the expiration of the Warranty Period: seventy-five percent (75%) of such costs;

(e) The Company shall, subject to these Limited Warranty Conditions, reimburse the Beneficiary for the reasonable costs of scaffolding and tenting to the extent that they are directly attributable to the repair of the Defective Areas against written evidence of such costs actually incurred.

(f) It shall be the Beneficiary’s burden when making any claim under this Warranty to show that Defective Areas:

(i) were not caused by failure to comply with the conditions set out in Clause 3; and

(ii) do not fall within any of the exclusions set out in Clause 4;

(g) No acceptance of any claim by the Company shall be effective unless it is explicitly communicated to the Beneficiary in writing by the Company; and

(h) Repairs under this Warranty may only be carried out after consultation with the Company who reserves the right to approve or negotiate the contracts for such repairs which shall be carried out as soon as practicable, but the Company does not assume liability for delay in carrying out or completion thereof. For the avoidance of doubt, the Beneficiary agrees that the Company shall not have any responsibility and/or liability for the negotiation and/or management of any contract for such repairs and shall not be a party to any such contract.

6 Disclaimer; Limitation of Liability

(a) EXCEPT AS SET FORTH IN THIS WARRANTY, COMPANY MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, OF ANY KIND WITH RESPECT TO THE COATINGS SYSTEM AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MECHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

(b) THE COMPANY’S ENTIRE AGGREGATE LIABILITY FOR ANY CLAIM OR CLAIMS UNDER CLAUSES 5(D) AND 5(E) OF THIS WARRANTY FOR A NEW BUILD YACHT SHALL NOT EXCEED FOUR (4) TIMES THE PURCHASE PRICE OF THE COATINGS IN THE DEFECTIVE AREAS, AND FOR MAINTENANCE, REPAINTS, REFITS OR REPAIRS SHALL NOT EXCEED FIVE (5) TIMES THE PURCHASE PRICE OF THE COATINGS DEEMED FAULTY.

(c) IN NO CIRCUMSTANCES WHATSOEVER SHALL THE COMPANY BE LIABLE FOR ANY DIRECT LOSSES OTHER THAN THOSE AMOUNTS DESCRIBED IN CLAUSES 5(D) AND 5(E) ABOVE, OR INDIRECT LOSSES INCLUDING (WITHOUT LIMITATION) DEMURRAGE, SLIPPING COSTS, HARBOR COSTS, HARBOR DUES, BOATYARD SERVICES AND THE LIKE ASSOCIATED WITH COATINGS REPAIR WORK, LOSS OF TIME, MONIES DUE TO THE BENEFICIARY’S EMPLOYEES OR TO OPERATORS OR CHARTERERS, LOSS OF PROFITS, LOST CONTRACTS, LOST OPPORTUNITY TO CONTRACT AND ANY SUCH SIMILAR COSTS AND ALL CLAIMS BY THIRD PARTIES AGAINST THE BENEFICIARY.

(d) The Beneficiary acknowledges that any associated or affiliated company of the Company (“Affiliate”) has no liability whatsoever with respect to the Yacht, and the Beneficiary releases such Affiliates from any and all such liability. The liability of the Company under this Warranty is (subject to Clause 6(e)) in substitution for all other liability of the Company and/or its Affiliates in connection with or relating to coatings, products and/or advice and assistance supplied in respect of the Yacht whether in contract, tort or otherwise.

(e) This Warranty does not exclude or restrict liability for death or personal injury caused by the sole negligence of the Company and/or its Affiliates.

7 Indemnity

The Beneficiary agrees that it will at all times from the Commencement Date hold harmless and indemnify the Company against all third party claims for loss, damage or expenses including legal expenses brought against the Company of whatsoever nature and howsoever arising caused by or related to the Coatings System, its application or repair under this Warranty. This indemnity shall apply to all third party claims except claims relating to death or personal injury arising out of the Company’s sole negligence in the performance of its obligations under this Warranty.

8 General

8.1 This Warranty and the Attachments attached hereto and forming a part hereof, sets out the complete, and final agreement and understanding between the Company and the Clients relating to the subject matter of this Warranty and supersede all prior oral or written agreements, understandings, representations, statements, and assurances. There are no warranties, representations, covenants, promises, agreements, conditions or understandings, either oral or written, between the Company and the Clients other than as set forth in this Warranty and the Attachments. The Company represents and acknowledges that Beneficiary is not relying upon any oral or written statement, warranty or representation by the Company, its employees, agents, and/or representatives not fully set forth in this Warranty.

8.2 No alteration, amendment, change or addition to this Warranty (including to any of the Attachments) shall be binding upon the Company or the Clients unless made in writing and signed by authorized representatives for each of the Company and the Clients.

8.3 The Parties shall agree to use the dispute resolution mechanism set out below in the event that any claim or dispute arises under or in connection with this Warranty:

(a) The Parties will attempt to settle such claim or dispute by good faith negotiations; and

(b) If any claim or dispute cannot be settled by negotiation within thirty (30) days after a written offer has been given to the other Parties to negotiate a settlement to such claim or dispute, the Parties shall, before resorting to court proceedings, attempt in good faith to resolve the claim or dispute by mediation administered by the American Arbitration Association (AAA) under its Commercial Mediation Procedures.

8.4 This Warranty shall be governed by and construed in accordance with the laws of the State of Texas, United States of America. All litigation concerning this Warranty, if necessary, shall occur only in the state and federal courts within the territory encompassed by the U.S. District Court for the Southern District of Texas, and the Parties agree to exclusive jurisdiction in such courts.

8.5 This Warranty may not be assigned by the Clients without the Company’s prior written consent.


Awlgrip HDT Single Stage Limited Warranty 24 Months (North America)

All capitalized terms not defined in these Limited Warranty Conditions shall have the meaning provided in the Limited Warranty of which this document is an Attachment.

1 Extent of Warranty

1.1 The Company hereby agrees, subject to these Limited Warranty Conditions set out herein, to guarantee to the Beneficiary the performance of the Coatings System on the Warranted Area when professionally applied to the Yacht (as evidenced by invoice) as per the Company provided Coatings Specification.

1.2 The obligations of the Company under this Warranty shall be in effect from the Commencement Date through the expiration of the Warranty Period for the Yacht.

1.3 The Commencement date means the date the Yacht leaves the

controlled environment of the construction hall or application

enclosure and first becomes exposed to the natural atmospheric

elements. This date shall be no later than four (4) months after

the date of completion of the application of the Coatings System.

1.4 Any repairs carried out under this Warranty do not extend the duration of this Warranty.

1.5 The Clients agree that the Beneficiary has the sole right to claim under this Warranty and they agree to cooperate fully with the Beneficiary and Company to fulfil all their obligations as specified in this Warranty.

2 Defective Areas

2.1 The Company shall be liable only for “Defective Areas” which throughout this Warranty shall mean an aggregated surface area exceeding two percent (2%) of the total surface of the Warranted Area (excluding those areas and defects referred to in Clause 4) where non-destructive testing shows that:

(a) On visual inspection spontaneous detachment of the coatings comprised in the Coatings System from each other, or from the substrate, has occurred; or

(b) In the case of a steel substrate, on visual inspection that the steel has corroded to a severity greater than Ri.2 as defined in ISO 4628-3:2003; or

(c) The Paint System has on visual inspection blistered, cracked and/or peeled above the size 2 quantity (density) 2, as defined in ISO 4628/2-4-5; or

(d) The gloss level of the Paint System applied in accordance with the relevant Technical Data Sheet on the hull exterior above the waterline, or the superstructure exterior, is less than seventy percent (70%) in the first twenty-four (24) months of the original gloss level, measured at an angle of sixty (60) degrees in accordance with the measurement of specular gloss of non-metallic paint films as defined in ISO 2813:2014; or

(e) The colour level of the Paint System on the hull exterior above the waterline or the superstructure exterior has changed by more than Delta E6 (De 6) for all colours up to twenty-four (24) months when measured in accordance with ISO 18314-1:2015

2.2 CLAUSES 2.1(A), 2.1(B) AND 2.1(C) SHALL ONLY APPLY TO NEW BUILD YACHTS AND THEREFORE SHALL NOT APPLY TO MAINTENANCE, REPAINTS, REPAIRS OR REFITS OF AN EXISTING YACHT. SUCH APPLICATIONS SHALL ONLY BE COVERED BY CLAUSES 2.1 (D) AND (E)

3 General Conditions

The Company shall not be liable for a claim unless:

(a) The following procedures have been adhered to and completed in full:

(i) For a new build Yacht less than thirty (30) meters in overall length and all Yacht maintenance, repaints, refits and repairs:

(A) Limited Warranty online registration completed;

(B) Coatings System applied to the Yacht as per standard Company published Coatings Specification; and

(C) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied.

(ii) For a new build Yacht thirty (30) to fifty (50) meters in overall length:

(A) Limited Warranty signed on the behalf of the Company, Owner, Yard and Applicator prior to application of Coatings;

(B) Coatings System applied as per Company provided Coatings Specification issued for the Yacht; and

(C) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied.

(iii) For a new build Yacht over fifty (50) meters in overall length:

(A) Completion of a Pre-Project Meeting with the Company, Owner, Yard and Applicator;

(B) Limited Warranty signed on the behalf of the Company, Owner, Yard and Applicator prior to application of Coatings;

(C) Coatings System applied as per Company provided Coatings Specification issued for the Yacht; and

(D) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied;

(b) Any surfaces and coatings damaged during work on the Yacht have been repaired to the Company’s Coatings Specification;

(c) All normal maintenance procedures (including without limitation all cleaning and washing procedures) are in line with the Company’s recommendations and have been duly carried out; and

(d) The defects are due to an inherent defect in the Coatings that results in Defective Areas as defined in Clause 2.1 above.

4 Exclusions

The Company shall not be liable for:

(a) Damage to the Coatings System arising from external causes outside the control of the Company including (but not limited to) welding or other heating, pollution, mechanical damage, electrical or electrolytic damage, incorrect cleaning or incorrect use, neglect, fire, explosion, radiation or other accident, acts of God, wars (whether declared or not), riot, civil commotion, vandalism or other malicious damage, industrial action, adverse weather conditions (such as, for example, sandstorms) and the like;

(b) Coatings on surface areas which because of their physical shape, characteristics or configuration present special difficulties in effecting specified preparation and coating, including (but not limited to) ladders, handrails and all small area equipment and attachments, and the like;

(c) Deterioration of the substrate caused by electro-chemical action arising from the presence of metals which are cathodic to the metal of those areas of the Yacht covered by this Warranty;

(d) In the case of maintenance, repaints, refits or repairs of an existing Yacht, any faults and/or defects caused by or related to already present coatings and coatings which have not been removed to the bare substrate;

(e) Deterioration of any part of the Coatings System caused by work carried out on the Yacht including (but not limited to) polishing or any other form of surface treatment without prior written consent;

(f) Any delay or failure by the Company to carry out its obligations under this Warranty arising out of circumstances beyond its control including (but not limited to) riot, civil commotion, industrial action and the like;

(g) Cracks or delamination in the Coatings System caused by substrate flexing or movement. The Yard is responsible for ensuring that the construction and design is appropriate for the chosen Coatings System, specifically for fairing with the chosen epoxy filler system, without causing it to crack or to delaminate;

(h) Antifouling & Foul release coatings. As the performance of antifouling is influenced by factors beyond the Company’s control, antifouling performance is specifically excluded from this Warranty. Foul release coatings are handled as a separate process and are specifically excluded from this Warranty;

(i) Performance on Wood. As wood is a natural material and the performance of coatings or varnishes will depend for a large part on the quality of the wood and its construction, these parts are specifically excluded from this Warranty; or

(j) Tanks, Flooring & Insulation. Due to the more complex nature of application and maintenance, these parts are specifically excluded from this Warranty.

(k) Topcoat finishes with an initial gloss of less than eighty seven (87) when measured at an angle of sixty (60) degrees in accordance with the measurement of specular gloss of non-metallic paint films as defined in ISO 2813:2014

5 Claims

In the event of a failure of the Coatings System as defined in Clause 2.1:

(a) The Beneficiary shall notify the Company of any claim by certified or registered mail (in each case, return receipt requested, postage prepaid) to the address of the Company set forth in the Limited Warranty giving full details of the nature of the defect, the size and area, and the circumstances in which it was discovered including the date of detection, the location of the Yacht and whether it is out of water or not. Unless this written notice is received by the Company within thirty (30) days of the date of detection of the defect all claims to which such notice relates shall automatically be excluded and time barred thereafter;

(b) If the Company wishes to inspect the area of the Yacht in respect of which a claim is made, the Yacht shall be made available for such inspection as soon as reasonably practicable and in any event within sixty (60) days of receiving such request at the location at which the Yacht was originally coated or such other location as may be mutually agreed between the Company and the Beneficiary. The Yacht will be made available for the Company’s inspection within such period and prior to any repair work being carried out, failing which the Company shall have no liability to the Beneficiary whether under this Warranty or otherwise;

(c) The Beneficiary shall, in the event of a claim, make available to the Company records showing the environment to which all areas of the Yacht covered by this Warranty have been exposed since initial application of the Coatings System such as, but not limited to: surface treating, washing/cleaning procedures used and any other data needed to re-construct the chronological service history of the Yacht;

(d) As Beneficiary’s sole exclusive remedy for breach of warranty and/or any other alleged claim relating to the Coatings System, the Company will, subject to these Limited Warranty Conditions, supply the Coatings to effect the repair of the Defective Areas and shall cover the reasonable costs of application of such Coatings as follows:

(i) for any claims received during the first twelve (12) months from the Commencement Date: one hundred percent (100%) of such costs; and

(ii) for any claims received after the first twelve (12) months from the Commencement Date until the expiration of the Warranty Period: seventy-five percent (75%) of such costs;

(e) The Company shall, subject to these Limited Warranty Conditions, reimburse the Beneficiary for the reasonable costs of scaffolding and tenting to the extent that they are directly attributable to the repair of the Defective Areas against written evidence of such costs actually incurred.

(f) It shall be the Beneficiary’s burden when making any claim under this Warranty to show that Defective Areas:

(i) were not caused by failure to comply with the conditions set out in Clause 3; and

(ii) do not fall within any of the exclusions set out in Clause 4;

(g) No acceptance of any claim by the Company shall be effective unless it is explicitly communicated to the Beneficiary in writing by the Company; and

(h) Repairs under this Warranty may only be carried out after consultation with the Company who reserves the right to approve or negotiate the contracts for such repairs which shall be carried out as soon as practicable, but the Company does not assume liability for delay in carrying out or completion thereof. For the avoidance of doubt, the Beneficiary agrees that the Company shall not have any responsibility and/or liability for the negotiation and/or management of any contract for such repairs and shall not be a party to any such contract.

6 Disclaimer; Limitation of Liability

(a) EXCEPT AS SET FORTH IN THIS WARRANTY, COMPANY MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, OF ANY KIND WITH RESPECT TO THE COATINGS SYSTEM AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MECHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

(b) THE COMPANY’S ENTIRE AGGREGATE LIABILITY FOR ANY CLAIM OR CLAIMS UNDER CLAUSES 5(D) AND 5(E) OF THIS WARRANTY FOR A NEW BUILD YACHT SHALL NOT EXCEED FOUR (4) TIMES THE PURCHASE PRICE OF THE COATINGS IN THE DEFECTIVE AREAS, AND FOR MAINTENANCE, REPAINTS, REFITS OR REPAIRS SHALL NOT EXCEED FIVE (5) TIMES THE PURCHASE PRICE OF THE COATINGS DEEMED FAULTY.

(c) IN NO CIRCUMSTANCES WHATSOEVER SHALL THE COMPANY BE LIABLE FOR ANY DIRECT LOSSES OTHER THAN THOSE AMOUNTS DESCRIBED IN CLAUSES 5(D) AND 5(E) ABOVE, OR INDIRECT LOSSES INCLUDING (WITHOUT LIMITATION) DEMURRAGE, SLIPPING COSTS, HARBOR COSTS, HARBOR DUES, BOATYARD SERVICES AND THE LIKE ASSOCIATED WITH COATINGS REPAIR WORK, LOSS OF TIME, MONIES DUE TO THE BENEFICIARY’S EMPLOYEES OR TO OPERATORS OR CHARTERERS, LOSS OF PROFITS, LOST CONTRACTS, LOST OPPORTUNITY TO CONTRACT AND ANY SUCH SIMILAR COSTS AND ALL CLAIMS BY THIRD PARTIES AGAINST THE BENEFICIARY.

(d) The Beneficiary acknowledges that any associated or affiliated company of the Company (“Affiliate”) has no liability whatsoever with respect to the Yacht, and the Beneficiary releases such Affiliates from any and all such liability. The liability of the Company under this Warranty is (subject to Clause 6(e)) in substitution for all other liability of the Company and/or its Affiliates in connection with or relating to coatings, products and/or advice and assistance supplied in respect of the Yacht whether in contract, tort or otherwise.

(e) This Warranty does not exclude or restrict liability for death or personal injury caused by the sole negligence of the Company and/or its Affiliates.

7 Indemnity

The Beneficiary agrees that it will at all times from the Commencement Date hold harmless and indemnify the Company against all third party claims for loss, damage or expenses including legal expenses brought against the Company of whatsoever nature and howsoever arising caused by or related to the Coatings System, its application or repair under this Warranty. This indemnity shall apply to all third party claims except claims relating to death or personal injury arising out of the Company’s sole negligence in the performance of its obligations under this Warranty.

8 General

8.1 This Warranty and the Attachments attached hereto and forming a part hereof, sets out the complete, and final agreement and understanding between the Company and the Clients relating to the subject matter of this Warranty and supersede all prior oral or written agreements, understandings, representations, statements, and assurances. There are no warranties, representations, covenants, promises, agreements, conditions or understandings, either oral or written, between the Company and the Clients other than as set forth in this Warranty and the Attachments. The Company represents and acknowledges that Beneficiary is not relying upon any oral or written statement, warranty or representation by the Company, its employees, agents, and/or representatives not fully set forth in this Warranty.

8.2 No alteration, amendment, change or addition to this Warranty (including to any of the Attachments) shall be binding upon the Company or the Clients unless made in writing and signed by authorized representatives for each of the Company and the Clients.

8.3 The Parties shall agree to use the dispute resolution mechanism set out below in the event that any claim or dispute arises under or in connection with this Warranty:

(a) The Parties will attempt to settle such claim or dispute by good faith negotiations; and

(b) If any claim or dispute cannot be settled by negotiation within thirty (30) days after a written offer has been given to the other Parties to negotiate a settlement to such claim or dispute, the Parties shall, before resorting to court proceedings, attempt in good faith to resolve the claim or dispute by mediation administered by the American Arbitration Association (AAA) under its Commercial Mediation Procedures.

8.4 This Warranty shall be governed by and construed in accordance with the laws of the State of Texas, United States of America. All litigation concerning this Warranty, if necessary, shall occur only in the state and federal courts within the territory encompassed by the U.S. District Court for the Southern District of Texas, and the Parties agree to exclusive jurisdiction in such courts.

8.5 This Warranty may not be assigned by the Clients without the Company’s prior written consent.


Awlgrip HDT Limited Warranty 36 Months (North America)

All capitalized terms not defined in these Limited Warranty Conditions shall have the meaning provided in the Limited Warranty of which this document is an Attachment.

1 Extent of Warranty

1.1 The Company hereby agrees, subject to these Limited Warranty Conditions set out herein, to guarantee to the Beneficiary the performance of the Coatings System on the Warranted Area when professionally applied to the Yacht (as evidenced by invoice) as per the Company provided Coatings Specification.

1.2 The obligations of the Company under this Warranty shall be in effect from the Commencement Date through the expiration of the Warranty Period for the Yacht.

1.3 The Commencement date means the date the Yacht leaves the

controlled environment of the construction hall or application

enclosure and first becomes exposed to the natural atmospheric

elements. This date shall be no later than four (4) months after

the date of completion of the application of the Coatings System.

1.4 Any repairs carried out under this Warranty do not extend the duration of this Warranty.

1.5 The Clients agree that the Beneficiary has the sole right to claim under this Warranty and they agree to cooperate fully with the Beneficiary and Company to fulfil all their obligations as specified in this Warranty.

2 Defective Areas

2.1 The Company shall be liable only for “Defective Areas” which throughout this Warranty shall mean an aggregated surface area exceeding two percent (2%) of the total surface of the Warranted Area (excluding those areas and defects referred to in Clause 4) where non-destructive testing shows that:

(a) On visual inspection spontaneous detachment of the coatings comprised in the Coatings System from each other, or from the substrate, has occurred; or

(b) In the case of a steel substrate, on visual inspection that the steel has corroded to a severity greater than Ri.2 as defined in ISO 4628-3:2003; or

(c) The Paint System has on visual inspection blistered, cracked and/or peeled above the size 2 quantity (density) 2, as defined in ISO 4628/2-4-5; or

(d) The gloss level of the Paint System applied in accordance with the relevant Technical Data Sheet on the hull exterior above the waterline, or the superstructure exterior, is less than eighty percent (80%) in the first twenty-four (24) months, or sixty percent (60%) in months twenty-four (24) to thirty-six (36), of the original gloss level, measured at an angle of sixty (60) degrees in accordance with the measurement of specular gloss of non-metallic paint films as defined in ISO 2813:2014; or

(e) The colour level of the Paint System on the hull exterior above the waterline or the superstructure exterior has changed by more than Delta E5 (De 5) for all colours up to thirty-six (36) months when measured in accordance with ISO 18314-1:2015

2.2 CLAUSES 2.1(A), 2.1(B) AND 2.1(C) SHALL ONLY APPLY TO NEW BUILD YACHTS AND THEREFORE SHALL NOT APPLY TO MAINTENANCE, REPAINTS, REPAIRS OR REFITS OF AN EXISTING YACHT. SUCH APPLICATIONS SHALL ONLY BE COVERED BY CLAUSES 2.1 (D) AND (E)

3 General Conditions

The Company shall not be liable for a claim unless:

(a) The following procedures have been adhered to and completed in full:

(i) For a new build Yacht less than thirty (30) meters in overall length and all Yacht maintenance, repaints, refits and repairs:

(A) Limited Warranty online registration completed;

(B) Coatings System applied to the Yacht as per standard Company published Coatings Specification; and

(C) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied.

(ii) For a new build Yacht thirty (30) to fifty (50) meters in overall length:

(A) Limited Warranty signed on the behalf of the Company, Owner, Yard and Applicator prior to application of Coatings;

(B) Coatings System applied as per Company provided Coatings Specification issued for the Yacht; and

(C) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied.

(iii) For a new build Yacht over fifty (50) meters in overall length:

(A) Completion of a Pre-Project Meeting with the Company, Owner, Yard and Applicator;

(B) Limited Warranty signed on the behalf of the Company, Owner, Yard and Applicator prior to application of Coatings;

(C) Coatings System applied as per Company provided Coatings Specification issued for the Yacht; and

(D) Application log kept to record: equipment used & settings, environmental conditions during application and quantity and batch numbers of products applied;

(b) Any surfaces and coatings damaged during work on the Yacht have been repaired to the Company’s Coatings Specification;

(c) All normal maintenance procedures (including without limitation all cleaning and washing procedures) are in line with the Company’s recommendations and have been duly carried out; and

(d) The defects are due to an inherent defect in the Coatings that results in Defective Areas as defined in Clause 2.1 above.

4 Exclusions

The Company shall not be liable for:

(a) Damage to the Coatings System arising from external causes outside the control of the Company including (but not limited to) welding or other heating, pollution, mechanical damage, electrical or electrolytic damage, incorrect cleaning or incorrect use, neglect, fire, explosion, radiation or other accident, acts of God, wars (whether declared or not), riot, civil commotion, vandalism or other malicious damage, industrial action, adverse weather conditions (such as, for example, sandstorms) and the like;

(b) Coatings on surface areas which because of their physical shape, characteristics or configuration present special difficulties in effecting specified preparation and coating, including (but not limited to) ladders, handrails and all small area equipment and attachments, and the like;

(c) Deterioration of the substrate caused by electro-chemical action arising from the presence of metals which are cathodic to the metal of those areas of the Yacht covered by this Warranty;

(d) In the case of maintenance, repaints, refits or repairs of an existing Yacht, any faults and/or defects caused by or related to already present coatings and coatings which have not been removed to the bare substrate;

(e) Deterioration of any part of the Coatings System caused by work carried out on the Yacht including (but not limited to) polishing or any other form of surface treatment without prior written consent;

(f) Any delay or failure by the Company to carry out its obligations under this Warranty arising out of circumstances beyond its control including (but not limited to) riot, civil commotion, industrial action and the like;

(g) Cracks or delamination in the Coatings System caused by substrate flexing or movement. The Yard is responsible for ensuring that the construction and design is appropriate for the chosen Coatings System, specifically for fairing with the chosen epoxy filler system, without causing it to crack or to delaminate;

(h) Antifouling & Foul release coatings. As the performance of antifouling is influenced by factors beyond the Company’s control, antifouling performance is specifically excluded from this Warranty. Foul release coatings are handled as a separate process and are specifically excluded from this Warranty;

(i) Performance on Wood. As wood is a natural material and the performance of coatings or varnishes will depend for a large part on the quality of the wood and its construction, these parts are specifically excluded from this Warranty; or

(j) Tanks, Flooring & Insulation. Due to the more complex nature of application and maintenance, these parts are specifically excluded from this Warranty.

(k) Topcoat finishes with an initial gloss of less than eighty seven (87) when measured at an angle of sixty (60) degrees in accordance with the measurement of specular gloss of non-metallic paint films as defined in ISO 2813:2014

5 Claims

In the event of a failure of the Coatings System as defined in Clause 2.1:

(a) The Beneficiary shall notify the Company of any claim by certified or registered mail (in each case, return receipt requested, postage prepaid) to the address of the Company set forth in the Limited Warranty giving full details of the nature of the defect, the size and area, and the circumstances in which it was discovered including the date of detection, the location of the Yacht and whether it is out of water or not. Unless this written notice is received by the Company within thirty (30) days of the date of detection of the defect all claims to which such notice relates shall automatically be excluded and time barred thereafter;

(b) If the Company wishes to inspect the area of the Yacht in respect of which a claim is made, the Yacht shall be made available for such inspection as soon as reasonably practicable and in any event within sixty (60) days of receiving such request at the location at which the Yacht was originally coated or such other location as may be mutually agreed between the Company and the Beneficiary. The Yacht will be made available for the Company’s inspection within such period and prior to any repair work being carried out, failing which the Company shall have no liability to the Beneficiary whether under this Warranty or otherwise;

(c) The Beneficiary shall, in the event of a claim, make available to the Company records showing the environment to which all areas of the Yacht covered by this Warranty have been exposed since initial application of the Coatings System such as, but not limited to: surface treating, washing/cleaning procedures used and any other data needed to re-construct the chronological service history of the Yacht;

(d) As Beneficiary’s sole exclusive remedy for breach of warranty and/or any other alleged claim relating to the Coatings System, the Company will, subject to these Limited Warranty Conditions, supply the Coatings to effect the repair of the Defective Areas and shall cover the reasonable costs of application of such Coatings as follows:

(i) for any claims received during the first twelve (12) months from the Commencement Date: one hundred percent (100%) of such costs; and

(ii) for any claims received after the first twelve (12) months from the Commencement Date until the expiration of the Warranty Period: seventy-five percent (75%) of such costs;

(iii) for any claims received after the first twenty four (24) months until the expiration of the Warranty Period: fifty percent (50%) of such costs;

(e) The Company shall, subject to these Limited Warranty Conditions, reimburse the Beneficiary for the reasonable costs of scaffolding and tenting to the extent that they are directly attributable to the repair of the Defective Areas against written evidence of such costs actually incurred.

(f) It shall be the Beneficiary’s burden when making any claim under this Warranty to show that Defective Areas:

(i) were not caused by failure to comply with the conditions set out in Clause 3; and

(ii) do not fall within any of the exclusions set out in Clause 4;

(g) No acceptance of any claim by the Company shall be effective unless it is explicitly communicated to the Beneficiary in writing by the Company; and

(h) Repairs under this Warranty may only be carried out after consultation with the Company who reserves the right to approve or negotiate the contracts for such repairs which shall be carried out as soon as practicable, but the Company does not assume liability for delay in carrying out or completion thereof. For the avoidance of doubt, the Beneficiary agrees that the Company shall not have any responsibility and/or liability for the negotiation and/or management of any contract for such repairs and shall not be a party to any such contract.

6 Disclaimer; Limitation of Liability

(a) EXCEPT AS SET FORTH IN THIS WARRANTY, COMPANY MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, OF ANY KIND WITH RESPECT TO THE COATINGS SYSTEM AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MECHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

(b) THE COMPANY’S ENTIRE AGGREGATE LIABILITY FOR ANY CLAIM OR CLAIMS UNDER CLAUSES 5(D) AND 5(E) OF THIS WARRANTY FOR A NEW BUILD YACHT SHALL NOT EXCEED FOUR (4) TIMES THE PURCHASE PRICE OF THE COATINGS IN THE DEFECTIVE AREAS, AND FOR MAINTENANCE, REPAINTS, REFITS OR REPAIRS SHALL NOT EXCEED FIVE (5) TIMES THE PURCHASE PRICE OF THE COATINGS DEEMED FAULTY.

(c) IN NO CIRCUMSTANCES WHATSOEVER SHALL THE COMPANY BE LIABLE FOR ANY DIRECT LOSSES OTHER THAN THOSE AMOUNTS DESCRIBED IN CLAUSES 5(D) AND 5(E) ABOVE, OR INDIRECT LOSSES INCLUDING (WITHOUT LIMITATION) DEMURRAGE, SLIPPING COSTS, HARBOR COSTS, HARBOR DUES, BOATYARD SERVICES AND THE LIKE ASSOCIATED WITH COATINGS REPAIR WORK, LOSS OF TIME, MONIES DUE TO THE BENEFICIARY’S EMPLOYEES OR TO OPERATORS OR CHARTERERS, LOSS OF PROFITS, LOST CONTRACTS, LOST OPPORTUNITY TO CONTRACT AND ANY SUCH SIMILAR COSTS AND ALL CLAIMS BY THIRD PARTIES AGAINST THE BENEFICIARY.

(d) The Beneficiary acknowledges that any associated or affiliated company of the Company (“Affiliate”) has no liability whatsoever with respect to the Yacht, and the Beneficiary releases such Affiliates from any and all such liability. The liability of the Company under this Warranty is (subject to Clause 6(e)) in substitution for all other liability of the Company and/or its Affiliates in connection with or relating to coatings, products and/or advice and assistance supplied in respect of the Yacht whether in contract, tort or otherwise.

(e) This Warranty does not exclude or restrict liability for death or personal injury caused by the sole negligence of the Company and/or its Affiliates.

7 Indemnity

The Beneficiary agrees that it will at all times from the Commencement Date hold harmless and indemnify the Company against all third party claims for loss, damage or expenses including legal expenses brought against the Company of whatsoever nature and howsoever arising caused by or related to the Coatings System, its application or repair under this Warranty. This indemnity shall apply to all third party claims except claims relating to death or personal injury arising out of the Company’s sole negligence in the performance of its obligations under this Warranty.

8 General

8.1 This Warranty and the Attachments attached hereto and forming a part hereof, sets out the complete, and final agreement and understanding between the Company and the Clients relating to the subject matter of this Warranty and supersede all prior oral or written agreements, understandings, representations, statements, and assurances. There are no warranties, representations, covenants, promises, agreements, conditions or understandings, either oral or written, between the Company and the Clients other than as set forth in this Warranty and the Attachments. The Company represents and acknowledges that Beneficiary is not relying upon any oral or written statement, warranty or representation by the Company, its employees, agents, and/or representatives not fully set forth in this Warranty.

8.2 No alteration, amendment, change or addition to this Warranty (including to any of the Attachments) shall be binding upon the Company or the Clients unless made in writing and signed by authorized representatives for each of the Company and the Clients.

8.3 The Parties shall agree to use the dispute resolution mechanism set out below in the event that any claim or dispute arises under or in connection with this Warranty:

(a) The Parties will attempt to settle such claim or dispute by good faith negotiations; and

(b) If any claim or dispute cannot be settled by negotiation within thirty (30) days after a written offer has been given to the other Parties to negotiate a settlement to such claim or dispute, the Parties shall, before resorting to court proceedings, attempt in good faith to resolve the claim or dispute by mediation administered by the American Arbitration Association (AAA) under its Commercial Mediation Procedures.

8.4 This Warranty shall be governed by and construed in accordance with the laws of the State of Texas, United States of America. All litigation concerning this Warranty, if necessary, shall occur only in the state and federal courts within the territory encompassed by the U.S. District Court for the Southern District of Texas, and the Parties agree to exclusive jurisdiction in such courts.

8.5 This Warranty may not be assigned by the Clients without the Company’s prior written consent.